Gas Propane Blacksmith and Knifemaking Forge made by BURNCRAFT with Sliding supp

Description

This is our small blacksmith, knifemaking forge with 12x12 cm (approx. 5x5") opening without the bottom plate,
and length 30 cm (approx. 12") with Sliding support.
It comes with
2/3"
gas/propane burner. The burner
comes pre-assembled
, however we recommend you should check the fittings for
leakage
before firing.
Burncraft
brand burner comes with
precision cast steel head
, which draws a lot of air due to precise proportions to
create a very efficient
Venturi effec
t. The burner burns so efficiently that it does not require forced air supply.
The gas control valve and air control wheel allow you to accurately dial the desired mixture of air and gas and achieve the desired temperature results.
Our burner is so efficient that it
needs very little gas / propane to achieve very high temperatures
. Suitable for melting soft metals, general blacksmithing, forging Damascus steel, hardening blades, etc.
The burner is designed so that
all the components are removable and replaceable
. Spare parts are available upon request.
Burner is the size of  13,8 inch(approx.350mm) burner's nozzle diameter is  2 inch (approx.48.5mm) that part of the burner where the air enters has a size of 2.3 inch (approx. 58mm)
The hose comes with
8 mm
internal opening.
We do not provide Gas pressure regulator
due to different country standards. It is much easier to provide your own that fits your country's standards than having to deal with the trouble to find the right adapter. We consider it much better, for you to work with the pressure regulators you are accustom to and familiar with in your own country. Just make sure to get the
high pressure type of regulator
.
Features of the forge:
- Easy to remove and attach burner.
-
30 cm
(12") deep forge body.
-
12x12 cm
opening without the bottom plate, about 12x10 cm with the plate.
- 2.5 см (1")
high-temp ceramic insulation
(holds up to 1500 C).
-
Sliding support
for long stock, extends up to 35 cm (14") in front of the opening.
- 38 cm (15")
high-temp bottom stone plate
that
e
xtends past
the forge
to support optional fireproof bricks
at both ends of the forge for reaching higher
temperatures when needed.
-
Less than one minute
from firing to metal in red-hot temperatures (depends on the thickness of the stock).
- All burner parts
replaceable and serviceable
.
Please remember to
always check your fittings for leaks
at each fire up, especially before the first firing. Working with burners and forges is literally playing with fire, so please stay safe and take all necessary safety measures.
Should you have any questions we would be happy to answer them. Please use the eBay messaging system.
Please note that we are in the European Union, therefore
no additional fees and taxes for countries within the EU
. All other countries may require custom fees and other taxes. They are your sole responsibility.
Please note that delivery to the islands and remote areas is discussed separately in each case.