Seeburg Remote Volume Control PRVC-4, "MOTOR ASSEMBLY ONLY," Tested & Working

Description

Seeburg Remote Volume Control PRVC-4, "MOTOR ASSEMBLY ONLY,"  Tested & Working
This motor assembly will fit and work on the following jukeboxes:
SPS2, SQS, STD and SMC/100-79M models with model SHP amplifiers. Model Names: Matador, Olympian, Sunstar, Vogue, Entertainer, Mardi-Gras, SMC-1 Disco, SMC-2 Phoenix, and the SMC-3 Prelude.
Along with the motor I have included a copy of the Seeburg instructions that were included in the original volume kits from the factory. I opened the gearbox and cleaned out the sticky factory grease. I lubricated that and the motor. I then tested the assembly by applying 12 vols DC current to the motor to insure all was good and it works fine in both directions.
You will receive a motor assembly as shown with the green grass friction disc in the photos. You are not buying a kit. You will need to have or acquire a grey (baby shoe) remote controller, a friction disc for the volume control, and wire cable to complete an installation in a Seeburg jukebox.
Tech Note:  When installing this motor always have the jukebox un-plugged or turned off. If you don't, there is a good chance you are going to pop a fuse that sends power to the remote control.  This is good to know as I speak with experience from not turning the jukebox off and I shorted a couple wires together while wiring it, causing a fuse to pop.
Shipping will be just .95 to the United States. I will ship outside the U.S. and it will be at
Post Office cost
. I package
well
and ship promptly.
Please leave feedback so that I know you got your product. I'll leave feedback for you too. It does help both of us.
Thanks for taking a look.